Drone Jamming & Detecting System :

Working & Concept behing drone jamming :

The devices work by emitting signals at the same frequencies used by the drone equipment but with greater strength.

-then breakage of signal from RC & GCS control.


Components required for making a drone Jammer :



1. Audio Alarm

2. Detection & Analysis System

3. Drone Jammer Gun

4. Omnidirectional Jammer Device 

5. Turnable Jammer Device

 Working Procedure for Drone Detection & Jamming System :

1.) Once drone signal is received or detected on tracking system , system will try to identify whether the fly is " black fly ". 

    ( actually the system will compare it with black and white list , which it have.) 

Case - | ( Black Fly is determined )    

a.) the front - end will report data to the control system through the network.

b.) The control center that based on the terminal software to display the target orientation and flying information and activates the intrusion alarm, the warning light flashes, 

Then, The patrol person who take the drone jammer gun will also receive the alram singal from the control center, and search the “black fly” drone, it is a fixed and mobile network capture system.


Capture the “Black Flying” drone pilot based on the detected information,the drone jammer system to interfer and blcok the “black flying” drone,and the turn-table interference equipment counter the “black flying” drone that entering the long-distance area. Omni-directional interference is handled by the “Black Flying” drone in the 1km to 2km area. After the anti-drone working is completed, the front-end of the control center to confirm the reports result.


Working Capabilities :

- Turntable jamming equipment mainly manages and controls long-range threatening targets and tracks them dynamically in real time. The longest distance can reach 3 km.

- The main control radius of omnidirectional interference is from 1 km to 2 km, and the diameter is from 2 km to 4 km.

- The networked portable UAV detection jamming gun can simultaneously display and jam the target detection information of UAV, and the working distance can reach 1.5 km.

-


Devices :

1.) DRONEKILLER Portable Drone Jammer


ye gun jaise aim baitha kr mara jata : it releases like LASER of RF or radio waves.


-man-portable drone jammer that disrupts C2 and GPS links,
Weight - 10lbs
link : DRONEKILLER Portable Drone Jammer | Handheld drone jammer for security and military forces (unmannedsystemstechnology.com)


Common frequencies targeted by drone signal jammers include:

DUET XL Drone Signal Jamming Device by IXI Electronic Warfare

DUET XL Drone Signal Jamming Device by IXI Electronic Warfare

  • 433 MHz
  • 915 MHz
  • 2.4 GHZ
  • 5.8 GHz
  • 4G & 5G cellular frequencies

Note : signal jamming result depends on  type of aircraft.

                - it may take RTL.

                - shift into hover mode. 

Types of Drone Signal Jammer : -

a.) drone jammer guns are built with a directional antenna and are used by operators to target a specific drone threat that has been identified.
- drone jammer guns are built with a directional antenna and are used by operators to target a specific drone threat that has been identified.
:- Other types of drone RF jammer, including portable, body-worn and fixed-site units, are designed to provide omnidirectional protection over a volume of airspace.

Disadvantages of Frequency Jamming :-

-may not work on autonomous drones

- system should be in in accordance with local laws and regulations to avoid possible legal consequences









 

Comments

Post a Comment

Popular posts from this blog

Generating a signed apk from Qt Creator

 As we know it's required to  be signed bundle of APK, to install in a Android Device. 1.  Generate a private key using the keytool command provided by the Java Development Kit (JDK). This key will be used to sign your .apk file. Run a command similar to the following to generate a private key: keytool -genkey -v -keystore my-release-key.keystore -alias alias_name -keyalg RSA -keysize 2048 -validity 100 00 Replace my-release-key.keystore with the desired filename for your keystore file and alias_name with a name for your key alias. 2. Packaging the .apk File : In Qt Creator, go to Build > Build APK (or Build > Prepare for Android App Bundle) to generate the release package. Qt Creator will compile your application in release mode and package it into an unsigned .apk file. 3. Signing the .apk File : Use the jarsigner tool provided by the JDK to sign your .apk file with the private key you generated earlier. Run a command similar to the following to sign the .apk ...
Read more

How make Signed Firmware from official Ardupilot using Cryptography

  Secure Boot Support This involves installing a bootloader with up to 10 public keys included and signing the ArduPilot vehicle firmware with one secret key. The bootloader will refuse to boot the firmware if the signature on the firmware doesn't match any of the public keys in the bootloader. Generating Keys To generate a public/private key pair, run the following command:     python3 -m pip install pymonocypher   Tools/scripts/signing/generate_keys.py NAME That will create two files: NAME_private_key.dat NAME_public_key.dat The generated private key should be kept in a secure location. The public key will be used to create a secure bootloader that will only accept firmwares signed with one of the public keys in the bootloader. Building secure bootloader To build a secure bootloader run this command:   Tools/scripts/build_bootloaders.py BOARDNAME --signing-key=NAME_public_key.dat That will update the bootloader in Tools/bootloaders/BOARDNAME_bl.bin to enabl...
Read more