Embedded Programming

Techniques For Effective Drone Jamming : Signal Jamming: This is the most common technique, and it involves sending out a stronger signal to override the drone’s control signals. GPS Spoofing: This involves sending false GPS signals to the drone, tricking it into thinking it’s in a different location. RFID Tagging: This involves attaching a small device to the drone that emits a signal, allowing the drone to be tracked and jammed. Components required to make the Jammer : RF Amplifier:  This is the key component of the jammer, as it amplifies the emitted signal. RF Transmitter:  This emits the signal that will disable the drone. Battery Pack:  This will power the jammer. Antenna:  This emits the signal from the transmitter.                              or Radio Frequency (RF) Amplifier:  This amplifies the RF signals used to disrupt the drone’s communication. Bandpass Filters: ...

Working & Concept behing drone jamming : The devices work by emitting signals at the same frequencies used by the drone equipment but with greater strength. -then breakage of signal from RC & GCS control. Components required for making a drone Jammer : 1. Audio Alarm 2. Detection & Analysis System 3. Drone Jammer Gun 4. Omnidirectional Jammer Device  5. Turnable Jammer Device  Working Procedure for Drone Detection & Jamming System : 1.) Once drone signal is received or detected on tracking system , system will try to identify whether the fly is " black fly ".      ( actually the system will compare it with black and white list , which it have.)  Case - | ( Black Fly is determined )     a.) the front - end will report data to the control system through the network. b.)  The control center that based on the terminal software to display the target orientation and flying information and activates the intrusion alarm , the wa...